Home / Capabilities

Surface Finishing Services

The finish is what your customer touches first, and it decides whether the part survives the environment it ships into. We coordinate coating, painting, anodizing and plating against a written specification.

ISO 9001-aligned quality system

Samples as fast as 10–15 days

Expert DFM & engineering support

100% dimensional inspection

Why Finish Specification Matters

A finish spec that names a process but not a thickness is the most common cause of rejected shipments. Powder coating at 40 µm and at 120 µm are different products with different salt spray performance.

We ask for four things before production: the process and standard, the target thickness range, the salt spray requirement in hours, and which surfaces must stay uncoated — threads, grounding points and sealing faces.

Where the spec is vague we push back before the run, not after. That conversation is cheaper than a rejected container.

Die Casting Production Process

Four stages, each with a check you can audit.

01 Specification Review

We confirm process, thickness, colour reference and test standard before any parts are processed.

02 Pre-treatment

Degreasing, then conversion coating or blasting depending on the substrate and the finish that follows.

03 Finish Application

Powder coating, liquid paint, anodizing or electroplating, applied to the agreed thickness range.

04 Cure & Test

Curing to the process schedule, then adhesion, thickness and salt spray checks on samples.

One-Stop Die Casting Solution

Five capabilities under one production plan. Most projects use three or four of them.

Die Casting Prototyping

Validate fit and function before tooling is cut.

Die Casting Tooling

In-house mold design and build, 1–4 cavities.

Aluminum Die Casting

HPDC from 160T to 1,250T for structural parts.

Secondary CNC Machining

Tapped holes, sealing faces, ±0.02 mm.